Settings

Mode
This option is available when the Schrack Smart Building Automation shading module "B1344" (Schlotterer RETROLux) is used. The operating mode can be changed from "standard blind" to "without working position" or "with working position". In this context, "working position" refers to a blind with a mechanical working position.

With working position
This mode is intended for Schlotterer RETROLux venetian blinds with a mechanical working position. A short button press changes the slat position and allows switching between "closed" and "working position". In this mode, the slats can only be adjusted within a certain range due to the mechanical design of the blind.

Without working position
This mode is intended for Schlotterer RETROLux venetian blinds without a mechanical working position. This mode grants you the ability to simulate a working position.

Type
This setting defines whether the shading element is a rolling shutter or a window. Windows are described in a separate chapter. A jalousie has a position, slat angle, and turnaround time, all of which are taken into account during movement. A roller shutter does not have a slat angle.

Vertical jalousie
This setting can be used for a jalousie that opens and closes vertically. When activated, an additional option is available for defining the opening direction.

Remove from universal scene
Universal scenes can be used, for example, to "open all blinds". Activate this option to exclude the shading element from universal scenes.

Remove from wind-lock
Activate this option to prevent the blind from opening automatically during strong winds. If this option is not available, the wind-lock must first be activated under "all-apps – settings – shading".

Lock blind
Activate this option to lock the blind. While locked, the shading position cannot be changed via the app or a button.

Close at dusk
Activate this option to automatically close the shading element at dusk.

Reserve
If a module has unused outputs, the corresponding shading elements are still displayed. The reserve function can be used to hide these unused elements in the app. To display them again, activate the corresponding elements in the module under the hardware section.

Extended parameter
When the Schrack Smart Building Automation shading module "B1344" is used in combination with a Schlotterer venetian blind and the appropriate operating mode is selected, additional options are available here.

These options relate to the different movement times specific to Schlotterer blinds, such as the working position and snapping times. The settings are preconfigured for optimal operation. If problems occur when switching between positions, contact the Smart Building Automation partner responsible for the system to have these settings adjusted.