General

Deactivate individual room control
If you have a module type C1144, you can deactivate a connected room control panel with this setting. In this case, only the actual value is taken from the room control panel. All other values are ignored.

External actual value
If you have a module type C1244, you can activate this setting to receive the actual value from another source than a connected PT1000. If you use this setting, you will have to choose the new source in the linkpanel.

Cooling disabled
This setting allows you to deactivate cooling for the connected climate device. Additionally, while this option is active, the cooling mode from the global settings will also be ignored.

Permanent ON/OFF
The valve output can be permanently switched on or off, independently of the current temperature and the current operating mode.

Remove from universal scene
The valve output can be permanently switched on or off, independently of the current temperature and the current operating mode.

Display actual/desired value
This value determines whether the actual or desired value should be displayed in the object panel.

Reserve
Even if not all room climate channels are connected to a module, all four control elements are still displayed for this module. If you want to hide these unconnected control elements, then mark them as reserved. You can unhide them via the app “hardware” (all apps – “hardware”).