Outputs

Valve Type
The used valve type is chosen here. The options are analog with "0-10V signal" and digital "open/close signal".

Valve
(With valve type "0-10V signal")
Select the analog output, which will be used for the valve control.

Mixer open
(With valve type "Auf/Zu signal")
Select here the output used to open the mixer valve.

Mixer closed
(With valve type "Auf/Zu signal")
Select here the output used to close the mixer valve.

Pump
Select the output used to connect the mixer pump.

Fault
Select an output to be switched if there is a fault.